A-A-2852
5. QUALITY ASSURANCE PROVISIONS
5.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
5.2 Sampling. The levels of inspection and acceptable quality levels (AQL) shall be in accordance with MIL-STD-150.
5.3 Lot formation. All P-traps of the same type and size from the same manufacturer offered for delivery at one time shall be considered a lot for purposes of inspection.
5.4 Sampling for visual and dimensional examination. A random sample of P-traps shall be selected from each lot in accordance with inspection level S-2, AQL 6.5, expressed in terms of percent defective. The sample unit shall be on P-trap. The sample P-traps shall be visually and dimensionally examined to verify compliance with this commercial item description.
5.5 Sampling for tests. A random of P-traps shall be selected from each lot in accordance with inspection level S-1, AQL 2.5, expressed in terms of percent defective. The sample unit shall be one P-trap.
5.6 Testing.
5.6.1 P-trap joints. Apply a torque of 30 ft.lbf (40 J) at the joints of P-traps and determine compliance to 3.8.1.
6. PACKAGING
6.1 Packaging. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES
7.1 Part Identification Number (PIN). P-traps conforming to this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the CID number, type and size. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the Federal cataloging system. The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business