A-A-2703
4.4 Visual and dimensional examination. A random sample of dispensers shall be selected from each lot for visual and dimensional examination in accordance with inspection level S-3, acceptable quality level (AQL) 6.5, expressed in terms of Percent defective to verify compliance with this description. The sample unit shall be one dispenser. Tolerance limits specified are absolute limits as defined in ASTM E 29.
4.5 Sampling for tests. A random sample of dispensers shall be selected from each lot in accordance with inspection level S-1, acceptable quality level (AQL) 4.0, expressed im terms of Percent defective. The sample unit shall be one dispenser.
4.6 Testing.
4.6.1 Preparation of samples. Each soap dispenser selected in mounted to a rigid, vertical structure or wall in accordance with the manufacturer’s instructions.
4.6.2 Capacity. Fill the soap containers with commercially compatible soap and observe for conformance to the minimum capacity requirement specified in 3.9.2, 3.10.1, and 3.11.1
4.6.3 Leakage. Actuate dispensing mechanism until soap emerges from the dispensing opening. Wipe excess soap from the dispensing opening with a clean dry cloth. After 24 hours, examine and determine conformance to 3.7.
4.6.4 Valve operating mechanism. Determine ease of operation during actuation of the valve for conformance to 3.10.
4.6.5 Self-priming. Determine self-priming requirements of the dispenser for conformance to 3.10.
4.8 Examination for preparation for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate, and shipping containers (as applicable) for conformance with the preservation, packaging, packing, labeling, and marking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, acceptable quality level (AQL) 6.5, expressed in terms of defects per hundred units.
5. PREPARATION FOR DELIVERY
5.1 Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business