A-A-2668A
3.7 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The metric values stated in parentheses are for information purposes only.
3.8 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units providing they fall within the tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable.
4. REGULATORY REQUIREMENTS
4.1 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Product Conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
6. PACKAGING
6.1 Packaging. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES
7.1 Part Identification Number (PIN). Dispensers conforming to this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the CID number, type and class. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the Federal cataloging sys tern. The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
AA26684C Example: (AA26684C) = Type IV, Class C
8 = Commercial item description number.
4 = Type 2 = II
3 = III
4 = IV
C = Class A
A = Carbon steel
B = Stainless steel
C = Aluminum
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business